Installation Of Upper Unit - Hoshizaki KMH-2000SRH/3 Instruction Manual

6) Confirm that the icemaker and storage bin are level in both the left-to-right and
front-to-rear directions. If necessary, level the storage bin in both the left-to-right and
front-to-rear directions according to the storage bin manufacturer's instructions.
7) Replace the panels and baffle (if applicable) in their correct positions (unless you are
installing an upper unit). See "II.E. Installation of Upper Unit."
E. Installation of Upper Unit
1) See "II.D. Setup" for the lower unit installation.
2) Remove the top panel and the top insulation of the lower unit. The top panel and the
top insulation of the lower unit are not required when installing an upper unit.
3) Unpack the upper unit, and remove the shipping carton, tape, and packing material.
4) Remove the panels of the upper unit.
5) Stack the upper unit on top of the lower unit.
6) Secure the upper unit to the lower unit using the 2 mounting brackets and the bolts
provided. See Fig. 5.
Icemaker
(Upper
Unit)
Icemaker
(Lower
Unit)
Mounting Brackets
Bin
Fig. 5
Bolts
14