Sk 100 Bodypack Transmitter - Sennheiser Evolution Wireless G3 Instruction Manual

Connecting the mains unit
Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.
To connect the mains unit:
Insert the connector of the mains unit
Pass the cable of the mains unit through the cable grip ¶.
Slide the supplied country adapter
Plug the mains unit
¶
º

SK 100 bodypack transmitter

Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
¸
Push the two catches
ment cover µ.
¸
µ
µ
Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover
into the socket
onto the mains unit
into a wall socket.
in the direction of the arrows and open the battery compart-
µ
locks into place with an audible click.
Putting the devices into operation
º
of the receiver.
.
13