Viessmann Vitodens 100-W WB1B Series Installation And Service Instructions Manual page 94

Additional Information
Parts List
Parts
001 Heat exchanger assembly, ASME
002 Heat exchanger connection pipe (supply)
003 Heat exchanger connection pipe (return)
004 Spring clips (set)
006 Fastener set (return pipe)
009 Vent pipe adaptor
010 P-Trap
011 Gasket for flue gases
012 Air intake cover
013 Air intake cap
014 Test port cap (set of 2)
015 Wall-mount bracket
016 Combustion chamber refractory
Start-up and Maintenance
017 Condensate pipe
018 Condensate hose
019 Gasket for air intake
020 Guide rails (set of 2)
021 Clip d=8 (set of 5)
023 Connector retaining clip (set of 2)
024 Sealing grommet, DN60
025 O-ring set for heat exchanger, 21 x 3 mm
026 Sealing grommet set
027 Air vent with shut-off base, e"
028 Supply/return o-ring set,18 x 3 mm
029 Support bracket setfor heat exchanger
030 Heating supply connection pipe
031 Heating return connection pipe
070 Heating return connection elbow
including air vent (027)
082 Fixed high limit, 210º F (99º C)
Start-up and Maintenance
083 Boiler sensor
084 Flue gas sensor
088 Flow switch VK315M
B ASME Rating plate
94
Vitodens 100-W, WB1B Installation & Service