Stacking Remote Condenser Units - Hoshizaki FD-1001MAH(-C) Instruction Manual

6. Stacking Remote Condenser Units

1) Install the lower remote condenser unit as described earlier in this section.
2) Place the upper remote condenser unit on top of the lower. See Fig. 10.
3) Secure the upper remote condenser unit to the lower remote condenser unit with the
4 screws provided.
4) Install refrigerant lines and make electrical connection as described earlier in this
section.
Screws
Fig. 10
22
Upper Remote
Condenser Unit
Screws
Lower Remote
Condenser Unit