Memory Seats - Chevrolet Silverado 2015 Owner's Manual

Memory Seats

Crew/Double Cab Shown, Other
Models Similar
If memory equipped, the SET, "1,"
"2," and (Exit) buttons on the
driver door are used to manually
save and recall memory settings for
the driver seat, outside mirrors, and
adjustable pedals (if equipped).
Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, and adjustable pedals (if
equipped) to the desired driving
positions.
2. Press and release SET, then
immediately press and hold 1
until a beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using 2.
To save positions to the
button and easy exit features:
1. Adjust the driver seat, adjustable
pedals (if equipped), and the
outside mirrors on some vehicles
to the desired positions for
getting out of the vehicle.
2. Press and release SET, then
immediately press and hold
until a beep sounds.
Seats and Restraints
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park), press and hold "1," "2," or
to manually recall the previously
stored memory positions. Releasing
"1, "2," or
positions are reached stops the
recall.
If the vehicle is ON and in P (Park),
press and release 1, 2, or
manually recall the previously
stored memory positions. Placing
(Exit)
the ignition in OFF/LOCK before the
stored positions are reached stops
the recall.
If something has blocked the driver
seat and/or adjustable pedals while
recalling a memory position, the
recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling for
two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
3-7
before the stored
to