Radio) - Chevrolet Silverado 2015 Owner's Manual

7-36 Infotainment System
Bluetooth (Voice
Recognition - Base

Radio)

Using Voice Recognition
To use voice recognition, press
on the steering wheel. Use the
commands below for the various
voice features. For additional
information, say Help while you
are in a voice recognition menu.
Pairing
Pairing a Phone
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four-digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with <Phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name to delete is
unknown, see Listing All Paired
and Connected Phones.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone to
delete.