Table of Contents
Advertisement
SAFETY CHECK-OUT
1. Check the area of your repair for unsoldered or
poorly soldered connections. Check the entire board
surface for solder splasher and bridges.
2. Check the interboard wiring to ensure that no wires
are "pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particu-
larly transistors, that were installed during a previ-
ous repair. Point them out to the customer and rec-
ommend their replacement.
4. Look for parts which, though functioning, show ob-
vious signs of deterioration. Point them out to the
customer and recommend their replacement.
2
After correcting the original problem, perform the following
safety check before return the product to the costomer.
FinePix6900Zoom TROUBLESHOOTING GUIDE
5.
RISK OF FIRE-
2.5A 125/250V
REPLACE FUSE
AS MARKED
2.5A 125/250V
6.
WARNING!
HIGH VOLTAGE
Caution:
For continued protection against
fire hazard, replace only with same
type 2.5 amperes 125/250 volts
fuse.
Attention:
Afin d'assurer une protection
permanente contre les risques
d'incendie, remplacer uniquement
par un fusible de meme, type 2.5
amperes, 125/250 volts.
Warning:
To reduce the electric shock, be
careful to touch the parts.
Advertisement
Table of Contents
