Page 2
His belief is one that we continue to share and it inspires every product we design. The CCM6 Series of ceiling mount speakers is designed to offer easy installation and high quality audio reproduction for discrete custom install applications. This manual describes the installation of CCM6 Series speakers within conventional stud and sheetrock (joist and plasterboard) ceilings.
• Document pack containing Quick Start Guide and via side mounted terminals to the speaker cables, with Note: If CCM6 Series speakers are to be installed Warranty information the baffle connecting automatically as it is inserted in in “new build” projects, pre-mount kits and back the frame.
Stereo Audio Applications: is similar. For applications where a pair of CCM6 Series speakers is to be used for conventional stereo reproduction, they Note: Different acoustic environments might be, should be located between 3m (10 ft) and 5m (16.5ft)
SURROUND STEREO 4.4 With the frame connected it may be lifted up into To install a CCM6 Series speaker proceed as Note: Always use high quality, low resistance described in the following paragraphs: the ceiling aperture. On speakers with tilting tweeters, speaker cable.
Page 6
= 1x 4.5 If the frame flange is to be painted it should be 4.6 The baffle can now be fitted into the frame. Ensure done at this stage. Any conventional, domestic paint that the connector on the baffle is oriented correctly may be applied by brushing, rolling or spraying.
Page 7
CCM663 away from the frame. If a bezel is to be replaced it is CCM664 a simple push-fit into the frame. CCM665 CCM663SR The CCM6 Series speaker is now installed and ready CCM664SR for use. CCM682 CCM683 CCM684 To tilt the tweeter simply hold it in one hand (taking care not to touch the dome) and angle it towards the listening position.