Advertisement
4.7 The tweeter can be tilted towards the listening
position and corresponding equalisation options
selected on some CCM6 Series models. The options
are listed in the following table:
Model
Tweeter Tilt
EQ Options
CCM662
Yes
Yes
CCM663
Yes
Yes
CCM664
Yes
Yes
CCM665
No
No
CCM663SR
No
No
CCM664SR
No
No
CCM682
Yes
Yes
CCM683
Yes
Yes
CCM684
Yes
Yes
To tilt the tweeter simply hold it in one hand (taking
care not to touch the dome) and angle it towards the
listening position. Tilt angle indicators at 15° and 30°
are provided, indicated by the dots on the tweeter
body. The dots also correspond to the three way
equalisation switch settings. Match the switch setting
to the number of tilt dots. The diagram above illustrates
tilting the tweeter and selecting equalisation settings.
EQ
EQ
EQ
4.8 The grille can now be fitted. The grille is held in
place magnetically so simply needs to be aligned with
the groove in the frame flange where it will click into
place. The diagram above illustrates fitting the grille.
Note: If the optional square grille is to be used the
bezel must first be removed. The bezel simply pulls
away from the frame. If a bezel is to be replaced it is
a simple push-fit into the frame.
The CCM6 Series speaker is now installed and ready
for use.
7
Advertisement
