Page 2
His belief is one that we continue to share and it inspires every product we design. The CWM6 Series of wall mount speakers is designed to offer easy installation and high quality audio reproduction for discrete custom install applications. This manual describes the installation of CWM6 Series speakers within conventional stud and sheetrock (joist and plasterboard) walls.
Page 3
The frame is connected via side Warranty information mounted terminals to the speaker cables, with the Note: If CWM6 Series speakers are to be installed baffle connecting automatically as it is inserted in the in “new build” projects, pre-mount kits and back Environmental Information frame.
4. Installing CWM6 Series Speakers Multi-channel Audio Applications The appropriate position for CWM6 Series speakers To install a CWM6 Series speaker, proceed as within the listening environment will depend on their For applications where multiple CWM6 Series speakers described in the following paragraphs:...
Page 5
4.2 If speaker cable is already present in the wall 4.4 With the frame connected it may be inserted into 4.5 If the frame flange is to be painted it should be space, pull the cable down through the aperture. If the wall aperture.
Page 6
= 1x 4.6 The baffle can now be fitted into the frame. Ensure 4.7 A three position high frequency level switch is that the connector on the baffle is oriented correctly fitted to CWM600 series models, on the front face of with the connector in the frame.
Page 7
4.8 The grille can now be fitted to the baffle. It is held in place magnetically, so simply needs to be aligned with the groove in the frame flange, where it will click into place. The diagram above illustrates fitting the grille. The CWM6 Series speaker is now installed and ready for use.