Advertisement
EUROPOWER
PMP530M
Internal switch-mode power
supply, noise-free audio,
superior transient response and
very low power consumption
Rack mount brackets included
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Exquisite EQ
Sometimes you may need to
fine-tune the sound of a microphone or
instrument. That's where you'll appreciate
PMP530M's highly musical 2-band
channel EQ. The Low control adjusts the
amount of bass content in the signal
(±15 dB @ 80 Hz) and the High control
adjusts the amount of treble (±15 dB @
12 kHz). Simply dial in the sound you like
with these two controls. If the Clip LED
stays on too long, or if it doesn't come on
at all, readjust the Level control. Done.
Front View
Channel
High and Low
Channel FX
Level
channel EQ
control
(volume)
XLR Mic
1/4" TRS Line
Input Pad
input
In jack
with Clip LED
Rear View
Carry
IEC power
handle
socket
Say Goodbye to Feedback
Nothing detracts from a perfect
performance more than feedback.
You know, those high-pitched squeals
that drive both human beings and dogs
over the edge. The PMP530M comes
loaded with BEHRINGER's amazing
FBQ Feedback Detection System,
which automatically pinpoints trouble
frequencies so you can snuff them out
before you—or your audience—go deaf.
Just touch the FBQ button and watch
as all feedback-related frequencies are
indicated by red LEDs on the 7-band
graphic EQ sliders. Pull the illuminated
sliders down until the LEDs go out, and
voilà—no more feedback!
Digital FX
FBQ Feedback
processor
7-band
Detection
with
graphic
System switch
100 presets
equalizer
Aux In RCA
Rec Out
1/4" TRS
jacks for Tape,
RCA jacks
Amp Insert
MP3, etc.
for analog
or digital
recording
devices
Professional
twist-lock
Speaker
1/4" TS Speaker
Output socket
Output jacks
Cooling fan
Page 2 of 4
Continued on next page
Main volume
Master
control with
FX Level
metering
Aux In Level
Power on/off
control
switch
Advertisement
