Site-Specific Option Number Setting - Avaya 4600 Series Installation Manual

Local Administrative Options
4. Press the * button to terminate the procedure, or the # button to save the new values.
If you press the # button, the following text displays.
New value
being saved
The new values are saved, and the user interface is restored to its previous state.

Site-Specific Option Number Setting

!
CAUTION:
Do not perform this procedure if you are using static addressing. Perform this
CAUTION:
procedure only if you are using DHCP and the LAN administrator instructs you to
do this.
Use the following procedure to set the Site-Specific Option Number (SSON).
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 7 7 6 6 # (Mute S S O N #)
Note:
Press the Mute button momentarily. Do not press this button while pressing other
Note:
keys/buttons. The 4630/4630SW IP Telephones and the 4690 IP Conference
Telephone do not have a dedicated Hold button. For all other 4600 Series IP
Telephones, pressing the Hold button instead of the Mute button also works.
All IP telephones except the 4601 display the following text left-justified at the top of the
display:
SSON=ddd
New=_
where ddd is the value of SSON.
Because it does not have a display, the 4601 IP Telephone's Call Appearance Line
indicators wink out the current SSON value. Call Appearance Line a represents the SSON's
first digit. Call Appearance Line b represents the SSON's second digit, and Call
Appearance Line a represents the SSON's third digit. For each digit, the applicable indicator
winks the number of times represented by the current SSON value 600 milliseconds on, 200
milliseconds off. An 1800 millisecond pause occurs before changing indicators. If the
current value is zero, the appropriate Call Appearance Line indicator flutters five times 50
milliseconds on, 50 milliseconds off instead of winking.
50 4600 Series IP Telephone Release 2.2 Installation Guide