Pre-Installation Checklist - Avaya 4600 Series Installation Manual

Pre-Installation Checklist

Before plugging in the 4600 Series IP Telephone, verify that all the following requirements are
met. Failure to do so prevents the telephone from working and can have a negative impact on
the network. Print copies of this checklist for each server and IP telephone.
Requirements to Verify about the Network
1. The Avaya Media Server is administered for IP telephones and has software for
Release 8.4 or later. Avaya Communication Manager Release 1.1 supports the
4602 and 4620/4620SW IP Telephones. The recommended configuration is the
latest PBX software and the latest IP telephone firmware. In the event you are
installing at a site without the latest PBX software, follow these recommendations:
Media Server
Release
Avaya
Communication
Manager 1.3+
Avaya
Communication
Manager 1.1,
Avaya
Communication
Manager 1.2
R10, Avaya
Communication
Manager 1.1,
Avaya
Communication
Manager 1.2
R10
R9.5
R9
R8.4
Avaya IP IP Telephone
Telephone Release
All R1.8+
telephones
All R1.8+
telephones
except 4630
4630 R1.74
4606, 4612, R1.8+
4624
4606, 4612, R1.8+
4624
4612, 4624 R1.1
4612, 4624 R1.0
Pre-Installation Checklist
Notes
Use the latest release.
Use the latest release.
Upgrade to Avaya
Communication Manager
Release 1.3 or later before
installing R1.8 on 4630
Telephones.
The 4602 and 4620 are not
supported.
The 4620, 4602, and 4630
are not supported. R1.5 is
the minimum 4600 IP
Telephone vintage.
R1.1 is the only supported
4600 IP Telephone vintage.
R1.0 is the only supported
4600 IP Telephone vintage.
Issue 2.2 April 2005 15