Setting The Clock; Turn On The Power - Panasonic Lumix DMC-ZS7 Basic Operating Instructions Manual

Setting the Clock

Set REC/PLAY switch to
REC/PLAY switch
To change time setting
Select [CLOCK SET] from the
[SETUP] menu ( 22), perform
and .
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in the camera for 24
hours beforehand.
To set local time at travel
destination
[WORLD TIME] ( 93)
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures at a digital photo centre or when using [TEXT STAMP].
Year can be set between 2000 and 2099.
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
For the operating procedures for the DMC-TZ10/DMC-ZS7 ( 17)
before turning on the power.

Turn on the power

Press [MENU/SET] while the
message is displayed
Press
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
Press [MENU/SET]
Press
(year, month, day, hour, minute,
display order or time display
format), and press
• To cancel
• When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
( The Clock is not set when the
camera is shipped.)
The power is turned on.
If the language select screen is not
displayed, proceed to step
to select the language,
to select the items
Select either [24HRS] or [AM/
Select the
PM] for the time display format.
setting
item
Change
the values
and
Select the display order for the
settings
day, month, and year ([M/D/Y],
[D/M/Y], or [Y/M/D]).
Press .
• To return to the previous screen, press
Turn on the power again and check the time display.
(Time and date can be displayed by
pressing [DISPLAY] several times.)
.
to set
.
19
VQT2R48