Configuring The Marvell Bios Setup To Delete An Array - Lenovo ThinkStation Hardware Maintenance Manual

2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
and press Enter. The RAID Config menu opens.
3. From the RAID Config menu, select Spare Management.
4. Use the arrow keys to select the optional hot spare hard disk drive you want to
delete.
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to delete the optional hot spare hard disk drive.

Configuring the Marvell BIOS Setup to delete an array

To configure the Marvell BIOS Setup to delete an array:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell
BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
and press Enter. The RAID Config menu opens.
3. From the RAID Config menu, select Delete array.
4. Use the arrow keys and the Enter key to select the array you want to delete
from the list.
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to complete the deletion.
Chapter 8. Installing hard disk drives and configuring RAID (types: 4155, 4158, 4218)
63