Table of Contents
Advertisement
Blocked Sensors
following table lists possible causes and actions for this message being
displayed.
Cause
The surface of the radar in the
grille is dirty or obstructed in
some way
The surface of the radar in the
grille is clean but the message
remains in the display
Heavy rain, spray, snow, or fog is
interfering with the radar signals
Swirling water, or snow or ice on
the surface of the road may
interfere with the radar signals
2014 MKX (mkx)
Owners Guide gf, 1st Printing, November 2013
USA (fus)
Driving Aids
If a message regarding a blocked
sensor appears in the information
display, the radar signals from the
sensor have been obstructed. The
sensors are located behind a fascia
cover near the driver side of the lower
grille. When the sensors are
obstructed, a vehicle ahead cannot be
detected and the collision warning
system does not function. The
Action
Clean the grille surface in front of
the radar or remove the object
causing the obstruction
Wait a short time. It may take
several minutes for the radar to
detect that it is no longer
obstructed
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
201
Advertisement
Table of Contents
