Lan Driver Setting - NEC Express5800/R120b-1 User Manual

F-20 Installing Windows Server 2003 x64 Editions

LAN Driver Setting

Link Speed
LAN drivers will be installed automatically, but the link speed and Duplex mode need to be
specified manually.
IP addresses is not be able to set when the "Internet Protocol (TCP/IP)" check box OFF.
This phenomenon will occur with the certain condition.
Check ON the "Internet Protocol (TCP/IP)" check box and IP address will be able to set.
When PROSet is not installed
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system.
When PROSet is installed
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system.