Appendix; List Of Lan Driver Setting Default Value - NEC Expres5800/A2040b Installation Manual

Lan driver
Table of Contents

Advertisement

8.

Appendix

8.1. List of LAN driver setting default value

List of default value (v15.6.0.10/16.2.0.4)
Property
802.3az EEE (Copper Only)
ARP Offload
EEE Control Policies (Copper Only)
Ethernet@WireSpeed (Copper
Only)
Flow Control
Interrupt Moderation
Jumbo Mtu
Large Send Offload V2 (IPv4)
Large Send Offload V2 (IPv6)
Maximum Number of RSS Queues
Network Address
NS Offload
Priority & VLAN
Receive Buffers
Receive Side Scaling
Speed & Duplex (Copper Only)
TCP/UDP Checksum Offload (IPv4)
TCP/UDP Checksum Offload (IPv6)
Transmit Buffers
Virtual Machine Queues
VLAN ID
VMQ VLAN Filtering
Wake On Magic Packet
Wake On Pattern Match
WOL Speed (Copper Only)
* In "Handoff of setting value", "-" means the value does not change after the update or recovery.
For the others, the values are set based on the above table after the update or recovery.
* For the properties with hatching, the corresponding values are set depending on your environment.
For the other properties, it is recommended to set to the default value.
* Regarding "Ethernet@WireSpeed", there are some cases that the confirmed value in [3.4 Save the
setting of LAN driver] is blank.
In that case, the value becomes "Enable".
* For the property with "Copper Only", there are some cases that the property is not existed depending
on the adapter or driver version but there is no problem on it.
* Regarding "Network Address", if the confirmed value in [3.4 Save the setting of LAN driver] is blank,
the value becomes "None".
Default value
Disable
Enabled
Optimal Power and
Performance
Enable
Rx & Tx Enabled
Enabled
1500
Enabled
Enabled
RSS 1 Queue
None
Enabled
Priority & VLAN Enabled
Default
Enabled
Auto Negotiation
Rx & Tx Enabled
Rx & Tx Enabled
500
WS2012 : Disabled
WS2012R2 : Enabled
0
Disable
Enabled
Enabled
Lowest Speed Advertised
- 24 -
Handoff of setting value
After update
After recovery
-
-
-
-
-
-
-
-
-
-
RSS 1 Queue
-
-
-
Default
-
-
-
-
500
Disabled
-
-
-
-
-
Lowest Speed
Advertised
August 2016
855-911221-105-A
Disable
-
-
Enable
Rx & Tx
Enabled
-
1500
Enabled
Enabled
-
-
-
Default
-
-
-
-
500
-
-
-
Enabled
Enabled

Advertisement

Table of Contents
loading

This manual is also suitable for:

Expres5800/a2010bExpres5800/a2020bExpres5800/a1040b

Table of Contents