Connecting Via Trigger Cable - JVC DLA-RS40 Instructions Manual

About the connection (Continued)

Connecting via Trigger Cable

■
This unit
1 HDMI 2
C
RS-232-C R/
3D
PC
SYNCHRO
CAUTION
● Do not supply the power to the other devices.
● Do not connect audio terminals of the other devices such as headphones etc. Otherwise, this may
cause a malfunction of the other devices or injury.
● Using beyond the rated value will cause malfunction.
Exercise adequate caution to prevent short circuit as the trigger terminal outputs a voltage of 12V.
●
● The default is set to "No output". Please set it under the item "Trigger" of menu [5] "Function" (Reference
page: 54).
Connected by RS-232C connection cable
■
This unit
1 HDMI 2
3D
SYNCHRO
RS-232C connection cable (sold separately)
STANDBY/ON
INPUT
OK
P C P Y
R B/ B
To Trigger output terminal
REMOTE
TRIGGER
CONTROL
MENU BACK
Trigger cable
(sold separately)
STANDBY/ON
INPUT
OK
C P C P Y
R/ R B/ B
REMOTE
PC TRIGGER
CONTROL
MENU BACK
ENGLISH
Screen
Trigger input terminal
( Φ 3.5)
RS-232C
terminal
29