How To Insert Batteries Into The Remote Control - JVC DLA-RS40 Instructions Manual

Controls and features (continued)
■ Remote Control
To turn off the power
To set the screen size
(Reference page: 34)
Anamorphic
To control lens
(Reference page: 32)
To hide the image
temporarily(Reference
page: 36)
To display/close the menu
(Reference page: 43)
To adjust color temperature
To set gamma

How to insert batteries into the remote control

①
● If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according to the
● Be sure to insert the
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
STAND BY
INPUT
HDMI 1 HDMI 2
ASPECT
ANAMO
LENS.
LENS AP.
CONTROL
HIDE
MENU
PICTURE MODE
FILM CINEMA
NATURAL
STAGE
USER2
USER1
COLOR COLOR
GAMMA
TEMP
P.FILE
②
end first.
RS50 RS50 RS60
ON
To turn on the power
To select input mode
COMP .
(Reference page: 32)
Button: displays information
RS50 RS50 RS40
PC
INFO.
Lens Aperture
Clear Motion Drive
C.M.D
To illuminate buttons on the remote
LIGHT
control for 7 second
To select or confirm
To return to the previous menu
BACK
(Reference page: 43)
ANIME
To switch picture mode
3D
Button
THX RS50 RS40 RS50
USER3
Color Profile
Color space button
RS50 RS40 RS50
PIC. COLOR
SPACE
ADJ.
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
③
ENGLISH
marks.
19