Troubleshooting - Speco CVC6246iHR User Manual

TROUBLESHOOTING

If you have trouble operating your camera refer to the following If you have trouble operating your camera, refer to the following
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly,
and
the surface of the f f
camera is hot.
MOTION DETECTION
function is not active.
Solution
● Check that the power cord and line connection
between the camera and monitor are correct
● Check that you have properly connected VIDEO y p p
cable to the camera VIDEO output jack.
● Is the lens stained with dirt? Clean your lens with
soft clean cloth.
● Set the monitor for the proper conditions.
● If the camera is exposed to too strong light
change the camera position.
● Adjust the lens' focus ● Adjust the lens focus.
● Adjust the contrast feature of the monitor.
● If you have an intermediate device, set the
75Ω/Hi-z properly.
● Check that you have properly connected
the camera to an appropriate power source.
● Have you set 'MOTION DET.' menu to off?
● Have you set 'MD LEVEL' to too low?
● Have you set 'MD AREA' properly
15
y