Removing The Power/Battery Status-Light Board; Prerequisites; Procedure - Dell XPS 14 Owner's Manual

Removing the Power/Battery Status-Light Board

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Follow the instructions from step 1 to step 7 in "Removing the Base Cover" on
page 12.
2 Remove the speakers. See "Removing the Speakers" on page 22.
3 Remove the battery. See "Removing the Battery" on page 25.

Procedure

1
Lift the connector latch and, using the pull-tab, disconnect the
power/battery-status-light cable from the system board.
2 Note the location of the tape that secures the power/battery status-light cable to
the palm-rest assembly, and then peel the tape.
3 Remove the screw that secures the power/battery status-light board to the
palm-rest assembly.
40
| Removing the Power/Battery Status-Light Board