10. Tighten the thumbscrew to secure the tape drive cage in the server.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 83.
Installing an optional tape drive
The following illustration shows how to install an optional tape drive.
To install a tape drive, complete the following steps:
62
System x3620 M3 Type 7376: Installation and User's Guide
1. Read the safety information that begins on page vii, "Installation guidelines" on
page 31, and "Handling static-sensitive devices" on page 33.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the drive tray from the server.
4. Install the tape drive on the tray as shown in the following illustration. If the
tape drive comes with a metal spacer attached, remove the spacer before you
install the tape drive on the tray.