Dimm Installation Sequence - IBM System x3620 M3 7376 Installation And User Manual

v If you install a ServeRAID-M1015 SAS/SATA adapter, make sure at least 2 GB of

DIMM installation sequence

The server requires at least one DIMM per microprocessor. Depending on the
server models, the server may come with one 2 GB RDIMM or 4 GB RDIMM, or
three 4 GB RDIMMs.
When you install additional DIMMs, install them in the order shown in Table 6, to
maintain performance.
The following table lists the DIMM connectors on each memory channel.
66
System x3620 M3 Type 7376: Installation and User's Guide
memory is installed in the server before you run DSA from a bootable CD.
Table 6. Non-mirroring (normal) mode DIMM installation sequence
Microprocessors installed
1
2
Table 7. Connectors on each memory channel
Memory channel
Channel 0
DIMM connector population sequence
3, 6, 8, 2, 5, 7
3, 11, 6, 14, 8, 16, 2, 10, 5, 13, 7, 15,
DIMM connectors
2, 3, 10, 11