Removing A Bezel Blank - HP dc7900 series Hardware Reference Manual

4. Reconnect the power cord and turn on the computer.
5. Lock any security devices that were disengaged when the access panel was removed.

Removing a Bezel Blank

On some models, there is a bezel blank covering the external drive bay that needs to be removed before
installing a drive. To remove a bezel blank:
1. Remove the front bezel.
2. Push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the
bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-7
ENWW
Removing a Bezel Blank
Removing a Bezel Blank 13