Installing A Rear I/O Assembly - Lenovo ThinkCentre Hardware Maintenance Manual
Machine types: 0401, 0421, 0994, 1165, 1184, 1186, and 2565
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
9. Remove the rear I/O assembly and rear I/O assembly cables from the computer.
Installing a rear I/O assembly
To install a rear I/O assembly, do the following:
1. Reconnect all the rear I/O assembly cables. See "System board connectors" on page 68.
2. Position the new rear I/O assembly into the slots, and route the rear I/O assembly cables so that the
excess cables tuck in the rear I/O assembly, and then push the rear I/O assembly
rear I/O assembly-locking tabs
3. Install the two screws
2
snap into position.
1
that secure the rear I/O assembly to the main bracket.
1
downward until the
.
Chapter 8
Replacing FRUs
93
Advertisement
Table of Contents
