Installing A Rear I/O Assembly - Lenovo ThinkCentre A70z Hardware Maintenance Manual

9. Remove the rear I/O assembly and rear I/O assembly cables from the computer.

Installing a rear I/O assembly

To install a rear I/O assembly, do the following:
1. Reconnect all the rear I/O assembly cables. See "System board connectors" on page 68.
2. Position the new rear I/O assembly into the slots, and route the rear I/O assembly cables so that the
excess cables tuck in the rear I/O assembly, and then push the rear I/O assembly
rear I/O assembly-locking tabs
3. Install the two screws
2 snap into position.
1 that secure the rear I/O assembly to the main bracket.
1 downward until the
.
Chapter 8 Replacing FRUs
93