IBM System x3500 Installation And User Manual page 105

v The following table lists the option part numbers and CRU part numbers for the
network adapters.
Table 9. Network adapters
Description
NetXtreme II 1000 express Ethernet adapter
NetXtreme II 1000 express dual-port Ethernet adapter
QLogic 10Gb CNA
QLogic 8Gb FC dual-port HBA
NetXtreme II 1000 express quad-port Ethernet adapter
Intel Ethernet dual-port server adapter I340-T2
Intel Ethernet quad-port server adapter I340-T4
Broadcom NetXtreme II dual-port 10GBaseT adapter
Intel X520-DA2 dual-port 10GbE SFP adapter
Intel X540-T2 dual-port 10GBaseT adapter
Broadcom NetXtreme I quad-port GbE adapter
Broadcom NetXtreme I dual-port GbE adapter
Emulex 10 GbE virtual fabric adapter III
Emulex 10 GbE virtual fabric adapter III lite
Attention: Static electricity that is released to internal server components when
the server is powered-on might cause the server to stop, which might result in the
loss of data. To avoid this potential problem, always use an electrostatic-discharge
wrist strap or other grounding system when working inside the server with the
power on.
To install an adapter, complete the following steps:
1. Read the safety information that begins on page vii and the "Installation
guidelines" on page 37.
2. Turn off the server and peripheral devices and disconnect the power cords and
all external cables.
3. Carefully turn the server on its side so that it is lying flat, with the cover facing
up.
Attention: Do not allow the server to fall over.
4. Unlock and remove the server cover (see "Removing the left-side cover" on
page 60).
5. See the documentation that comes with the adapter for any cabling instructions
and information about jumper or switch settings. (It might be easier for you to
route cables before you install the adapter.)
6. Touch the static-protective package that contains the adapter to any unpainted
metal surface on the server; then, remove the adapter from the package.
7. Determine the PCI slot into which you will install the adapter.
8. Rotate the adapter-retention brackets to the open position.
Network Adapters
Option part
Chapter 2. Installing optional devices
CRU part
number number
39Y6066 39Y6070
42C1780 49Y7947
42C1800 42C1802
42D0510 42D0516
49Y4220 49Y7949
49Y4230 49Y4232
49Y4240 49Y4242
49Y7910 49Y7912
49Y7960 49Y7962
49Y7970 49Y7972
90Y9352 90Y9355
90Y9370 90Y9373
95Y3762 9573766
95Y3768 95Y3766
87