Cleaner Description; On/Off Switch; Handle Release Pedal - Hoover SteamVac All Terrain Carpet and Hard Floor Cleaner with Auto Rinse Feature Steam Vacuum Owner's Manual

2. How to use

Cleaner description

2-1
1
3
2
4
5
6
7
8
10
11
17
16
14
13
15
2-2

ON/OFF switch

To turn cleaner ON, push switch down.
To turn cleaner OFF, push switch up.
18
19
20
21
9
22
12
25
24
2-3

Handle release pedal

Step on pedal (A) to lower handle to
operating position. Handle does not lock
into a single position but "floats" to allow
convenient operation.
The assembled cleaner will look like the drawing.
1. Hand grip
2. Solution trigger: press to release cleaning solution
3. ON/OFF switch
4. Rinse Setting switch
5. SpinScrub™ hand tool
6. Carrying handle
7. Clean water tank handle
8. Clean water tank
9. Detergent container
10. Recovery tank handle
11. Recovery tank: holds dirty solution
12. Recovery tank latches
13. SpinScrub mode selector
14. Solution tube connection port
15. Edge cleaners: provided on both sides of nozzle to
remove dirt near baseboards
16. Nozzle
17. Hose connection port
18. Cord hook: rotates for quick cord release
19. Hose
20. Hose/tool caddy
21. Stair/upholstery nozzle
23
22. Hard floor squeegee
23. Cord/hose hook
24. Handle release pedal
25. Soft wheels
This cleaner is intended for household use.
Operate cleaner only at voltage specified on
data plate on back of cleaner. Plug cleaner into
a properly grounded outlet.
A
2-4
To transport
To move your cleaner from room to
room, put handle in upright and locked
position, tilt cleaner back on wheels and
push forward.
Continued
7