1 0
Slide rack down into place. Insert
1 0
screw at (D) and tighten with a
Phillips screwdriver.
1 3
Position tool in holder at base of
1 3
cleaner and snap it into place as
shown at arrow.
1 1
D
Storing hose & tools
1 1
Store hose on rack by first positioning
hose in front section of holder.
1 4
Slide bare floor attachment into
1 4
holder as shown.
1 2
F
E
Continue wrapping hose under
1 2
lower hook (E). Snap hose end fully
into holder (F).
The hose end must be pushed com-
pletely down into holder (F) to ensure
maximum suction when cleaning
floors.
5