Hoover FloorMATE FloorMATETM The Hard Floor Cleaner Owner's Manual page 16

Assemble handle
1-2
A
Assemble Handle
Press down on latch (A) and remove
clean solution tank from upper
handle.
1-5
Replace clean solution tank by posi-
tioning bottom first. Press latch and
snap top portion into place.
4
1-3
B
With cord hook (B) to back of cleaner,
push upper handle down onto cleaner.
Insert short screw in front of tank area.
Tighten screw with a Phillips screw-
driver.
1-4
Insert the two longer screws into back
of handle as shown. Tighten with a
Phillipa screwdriver.
Continued