Error Code List - Pioneer AVH-P5150DVD/XN/RC Service Manual

5

5.4 ERROR CODE LIST

Error status
It is a disc unable to be played back.
Media Error
NON-PLAYABLE DISC
Open (No display)
Read Error ERROR-02-99
Focus Error(Focus Error
in mechanism set up) ERROR-02-90
Surface Error ERROR-02-9E
Address not found
ERROR-02-80
(Invalid Track)
Spindle Lock ERROR-02-91
Carriage HOME ERROR-02-92
ID/SUBCODE Read Error
ERROR-02-94
AV CHIP decode Error
ERROR-02-9A
AV CHIP Recovery NG
ERROR-02-9B
Error of PLAY BACK Mode
ERROR-02-9C
Status
Disc Data Error ERROR-02-9D
Temp Error Temperature protection circuit is
(In Case of High being activated.
Temperature) THERMAL PROTECTION IN MOTION
No Disc
(including Disc loading (No display)
and ejecting)
Loading_Mecha Error (No display)
It is a protected disc.
DRM Error
PROTECTED DISC
Region code is incorrect.
Region code Error NG
DIFFERENT REGION DISC
It is a disc unable to be played back.
CPPM*3 Key Error *4
NON-PLAYABLE DISC
CPRM Key Error *7
NON-PLAYABLE DISC
AWM*5 Error *4 (No display)
REQUEST error ERROR-02-A0
Failure in issuing read
ERROR-02-A1
command (chip dependent)
Adjustment of L0 is NG. ERROR-02-A2
Adjustment of L1 is NG. ERROR-02-A3
LD system NG ERROR-02-A4
Gain adjustment system NG. ERROR-02-A5
Gain determining system NG. ERROR-02-A6
Servo initial setting related items NG. ERROR-02-A7
Disc is not clamped yet. ERROR-02-A8
Tracking system NG. ERROR-02-A9
Media setting system NG. ERROR-02-AA
Focus Error ERROR-02-AB
Error of PLAY BACK
ERROR-02-B0
Mode Status
Error of PLAY BACK
ERROR-02-B1
Mode Status
Undefined Error ERROR-FF-FF
X: Cancel the error by operation. -: Error is not cancelled by operation. *: No setting
*1 A content displayed on OSD. As for the items having multiple display patterns, the upper row is for the Japanese version Full GUI, and the lower row is for
the Touch Panel model and Full GUI (English version).
*2 A parameter of UART command, such as "receipt error notice", that the DVD mechanism transmits.
*3 CPPM(Content Protection for Prerecorded Media) : A copyright protection technique used in DVD-A. The protection is realized by using the keys recorded
on the media and the device key held by the player.
*4 DVD-A compatible model only.
When an error has occurred, only the audio output will be muted but playback operation will continue. Furthermore, acceptance of the user operation will be
the same as usual.
*5 AWM (Audio WaterMark): Electronic watermark. Information on the copyright owner or CCI (copy control information) are recorded so that illegally copied
discs can be identified.
*6 Notice as an error status will not be given
*7 CPRM(Content Protection for Recordable Media) : A copyright protection technique for digital contents used for re-writable DVD or memory card.
(DVD-VR model only)
5
6
UART
OSD *1 *2
00h A disc containing the unplayable Format only.
10h Door open error
20h Transfer start error
21h Focus error
Focus error during set up
22h (A focus has never been achieved with that
disc.)
23h Address not found.
Spindle lock NG
24h
(the disc cannot rotate)
Carriage home NG
25h (The pick up tries to return to carriage
home, but it cannot go back and stopped.)
ID/SUBCODE Read Error (ID/SUBCODE
26h
cannot be read due to scratch or stain.)
AV CHIP decode NG
2Ah
(AV chip cannot be decoded.)
2Bh AV CHIP recovery NG
Playback state error
2Ch
(An error due to software bug.)
2Dh Disc Data NG
High temperature
30h (Playback is stopped because the pick up
temperature is 89 C or higher.)
Disc has not been inserted.
40h
(Including Load in process or Eject in process.)
Loading mechanism error
50h
(The disc cannot be clamped.)
DRM error
70h
(All music cannot be played back due to DRM.)
Region code NG (Unable to be played back
90h
due to incorrect mechanism region.)
91h Key Error for playback
93h Key Error for playback
Playback the illegally copied disc by DVD-A
*6
(Mute the sound on the mechanism side.)
A0h REQUEST error
A1h Failure in issuing the read command
A2h L0 adjustment is NG.
A3h L1 adjustment is NG
A4h LD system NG
A5h Gain adjustment system NG.
A6h Gain determining system NG.
A7h Servo initial setting related items NG.
A8h Disc is not clamped yet.
A9h
Tracking system NG
AAh Media setting system NG
ABh JUMP over layers NG
B0h Navigation command error
B1h Retry over
FFh Undefined error
AVH-P5150DVD/XN/RC
6
7
ACC
Meaning Off/On
X
*
X
X
X
X
X
X
X
X
X
X
X
X
*
X
-
-
-
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7
8
Method of reset
A
Source Eject Play Key
Off/On
X X -
* * *
X X X
X X X
X X X
X X X
B
X X X
X X X
X X X
X X X
X X X
X X X
X X X
- - -
C
* * *
- X -
- X -
- X -
- X -
- X -
D
X X -
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
E
X X X
X X X
X X X
F
59
8