Pioneer VSX-917V-K Service Manual page 139

5
5 (TUNE/ST +/–) / ENTER
Use the arrow buttons when setting up your
surround sound system .Also used to control
DVD menus/options and for deck 1 of a double
cassette deck player. Use the TUNE
buttons to find radio frequencies and use ST
/ to find preset stations.
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main
TV to the TV CTRL button .
TV - Use to turn on/off the TV power.
TV VOL +/- - Use to adjust the TV volume.
INPUT SELECT - Use to select the TV input
signal.
TV CH +/- - Use to select channels.
7 Component control buttons
The main buttons ( , , etc.) are used to
control a component after you have selected it
using the MULTI CONTROL buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding
MULTI CONTROL button (for example DVD,
DVR or TV (when connected to a DTV)).
DTV ON/OFF - Switches a digital TV on/off.
DTV INFO - Use to bring up information
screens on a digital TV.
MPX - Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality.
AUDIO - Changes the audio language or
channel on DVD discs.
DISP - Switches between named station
presets and radio frequencies.
SUBTITLE - Displays/changes the subtitles
included in multilingual DVD-Video discs.
CH +/- - Use to select channels when using
a TV, VCR, DVR, etc.
The following DVR controls can be accessed by
pressing SHIFT:
ìREC - Starts recording.
REC STOP - Stops recording.
JUKEBOX - Switches to the Jukebox feature.
HDD/DVD - These buttons switch between
the hard disk and DVD controls for DVD/
HDD recorders.
5
6
/
VSX-917V-K
6
7
8 RECEIVER CONTROL buttons
AUTO SURR ñ Selects Auto Surround
(Auto playback) or Stream
Direct playback. Also when
listening to XM Radio, AUTO SURR
selects XM HD Surround feature.
STEREO/F.S.SURR - Switches between
stereo playback and Front Stage Surround
Advance modes .
STANDARD - Press for Standard decoding
and to switch between the various Pro Logic
IIx and Neo:6 options.
ADV.SURR. - Use to switch between the
various surround modes.
SUBTITLE - Displays/changes the subtitles
included in multilingual DVD-Video discs.
CH +/- - Use to select channels when using
a TV, VCR, DVR, etc.
PHASE - Press to switch on/off Phase
Control.
ACOUSTIC EQ - Press to select an
Acoustic Calibration EQ setting.
DIALOG - Use to make dialog stand out
when watching TV or a movie.
SOUND RETRIEVER - Press to restore
CD quality sound to compressed audio
sources.
9 SHIFT
Press to access the DVR controls (above the
component control buttons) as well as some
receiver controls.
10 INPUT SELECT
Use to select the input source (use SHIFT for
INPUT SELECT ).
11 SOURCE
Press to turn on/off other components
connected to the receiver.
12 Character display (LCD)
This display shows information when trans
mitting control signals.
The following commands are shown when
youíre setting the remote to control other
components (see Controlling the rest of your
system):
SETUP - Indicates the setup mode, from
which you choose the options below.
PRESET -ISee Selecting preset codes
directly.
DIRECT F - See Direct function.
ERASE - See Erasing one of the remote
control button settings.
RESET - See Erasing all of the remote
control presets.
READ ID - See Confirming preset codes.
7
8
A
B
C
D
E
F
139
8