Monitoring Menu (M1) - Honeywell NXL User Manual

7
58(96)

7.4.1 Monitoring menu (M1)

You can enter the Monitoring menu from the Main menu by pushing the Menu button right when the
location indication M1 is visible on the display. How to browse through the monitored values is
presented in Figure 7-5.
The monitored signals carry the indication V#.# and they are listed in Table 7-2. The values are
updated once every 0.3 seconds.
This menu is meant only for value checking. The values cannot be altered here. For changing values
of parameters see Chapter 7.4.2.
Figure 7-5. Monitoring menu
Control Keypad
Honeywell Honeywell
Honeywell Honeywell