Sony STR-KM5000 Service Manual page 8

STR-KM5000
Name Function
b)
Press to pause playback or
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
b)
Press to stop playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
TV CH +/– Press TV CH +/– and TV (
at the same time to select
preset TV channels.
PRESET +/–
Press to select
– preset stations.
– preset channels of the VCR
or satellite tuner.
TUNING +/– Press to scan a station.
FM MODE Press to select the FM
monaural or stereo reception.
TV
Press TV and the button with
orange printing at the same
time to enable the TV
operation.
RETURN/
Press to
EXIT – return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
Press RETURN/EXIT
and TV ( ) at the same time
to return to the previous menu
or exit the TV's menu while
the menu is displayed on the
TV screen.
8
Name Function
After pressing DVD/BD
MENU (
/ / / ( ) or MENU/HOME (
press , , or to select the
settings. Then, press
enter the selection if you have
pressed DVD/BD MENU or
MENU/HOME previously.
Press
selection of the receiver,
) VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
DISPLAY Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (
at the same time to display
TV's information on the TV
screen.
TOOLS/ Press to display and select the
OPTIONS
options of the DVD player or
Blu-ray disc player.
Press TOOLS/OPTIONS and
TV (
display options applicable to
the Sony TV.
-/--
Press to select the channel
entry mode, either one or two
digits of the VCR.
Press -/-- and TV (
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/ Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR Press to clear a mistake when
you press the incorrect
numeric button.
Name
Numeric
), AMP MENU buttons
), (number 5
to
also to enter the
TV INPUT
SLEEP
)
a)
The number 5, MASTER VOL +, TV VOL + and
buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)
This button is also available for DIGITAL
MEDIA PORT adapter operation. For details on
) at the same time to the function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
) at the
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Function
Press to
– preset/tune to preset
a)
)
stations.
– select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press 0/
10 to select track number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV ( ) at the same time to
select the TV channels.
Press TV INPUT and TV ( )
at the same time to select the
input signal (TV input or
video input).
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.