Part Names And Functions - Fujitsu Plasmavision PDS4208W-B Service Manual

PART NAMES AND FUNCTIONS

Front
q
w
ON (GRN)
STD-BY (RED)
NO-SIGNAL (ORG)
Control Panel (bottom)
POWER MODE WIDE
r t
q Power indicator lamp
This lamp shows whether the main power is ON or
OFF, as follows :
Lit (red) : Standby
Lit (green) : Power ON
Lit (orange) : Power saving (DPMS: Power
Flashing (red) : Malfunction (Flashes differently
w Remote control signal receiver
Receives signals from the remote control.
e Main Power Switch Indicator
Indicates the location of the Main Power switch, at the
bottom of the display.
r Power button [POWER]
Turns the power ON or OFF when the main power
switch, provided at the bottom of the display, is ON.
t Input mode selector button [MODE]
Switches between image input modes.
y Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
u Menu button [MENU]
Displays image and sound adjustment menus.
i Adjustment buttons [
The [ / ] buttons can also be used to scroll through
the options when a menu is displayed.
o Adjustment buttons [
The [ / ] buttons can also be used to scroll through
options in a menu, or to change values.
!0 Set button [ENTER]
Press this button to finalize the selection of a desired
option in a menu.
POWER
e
MENU ENTER
y u io !0
saving function) mode ON
depending on the type of
malfunction.)
/ ]
/ ]
Remote control
q
e
i
SHIFT
1
2
3
4
Strap hole
q Power ON button [POWER ON]
Turns the power ON.
w Power OFF button [POWER OFF]
Turns the power OFF.
e RGB input mode selector button [RGB]
Switches between RGB input modes.
r Video input mode selector button [VIDEO]
Switches between video input modes.
t Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
y Menu button [MENU]
Use this button to display a desired menu for adjusting
the image and sound.
u Volume adjustment buttons [VOL +/-]
Unused.
i Adjustment buttons [
Use these buttons to scroll through options in a menu
and change values.
o Enter button [ENTER]
Press this button to finalize the selection of a desired
menu or option within a menu.
!0 Display selector buttons [SHIFT 1-4]
When you use two or more displays, you can use
these buttons to control up to four displays by
assigning a unique number to each of the displays.
– 8 –
w
VIDEO
t
r
y
MENU
VOL
u
o
ENTER
!0
/ / / ]