Fujitsu Plasmavision PDS4208W-B Service Manual page 42

(9) Disconnect the wire of the Key-Switch and LED,
and move them from the Rear Case Lower.
(10)Remove the Frame Panel from Frame Case.
(10)-1 Remove the 6 screws on the Frame Panel-
Bottom.
(10)-2 Remove the 3 screws on the Frame
Panel-Top.
(11)Remove the PDP panel together with the other
parts from the Front Case.
(11)-1 Install the Frame Panel MID Upper using the 2
screws.
(11)-2 Install the 2 screws jigs to the PDP Panel Unit.
(11)-3 Have two peoples hold the screw jig and the
Frame Panel MID Upper and remove the PDP
unit from the Front Case.
Frame Panel-Bottom
– 41 –
Frame Panel-Top