Table of Contents
Advertisement
Bilingual programme
To listen to
On-screen display
Main
MAIN
Sub
SUB
Main and sub
MAIN/SUB
Standard sound*
No indicator
* Usually the main sound (monaural)
Selecting the sound during playback
Press AUDIO MONITOR to select the sound
To listen to
On-screen display
Stereo/main and sub
STEREO
(left and right channels)
Left channel/main
L CH
Right channel/sub
R CH
Standard sound*
No indicator
* The mixed sound of left and right channels (monaural)
How sound is recorded on a video tape
The VCR records sounds onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded onto
the normal audio track along the edge of the tape.
Stereo
Usually mixed left/
right channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound (left/
right channels)
Notes
• To play a tape in stereo, you must use the AUDIO OUT connections.
• When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
• If the AUDIO MONITOR button does not function, check that AUDIO MIX in the
SET UP MENU is set to OFF.
• If HIFI AUDIO is set to STD, the standard sound will be recorded on both the hi-fi
and normal audio tracks. Pressing AUDIO MONITOR will not change the sound.
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the
indicator flashes in the display window, then turns off), distortion
may occur if the tape was recorded in poor condition. If so, manually adjust
the tracking.
Press the PROGRAM +/– buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons (the
indicator lights up). To resume automatic
tracking adjustment, eject the tape and reinsert it.
About the R
2
(Reality Regenerator) function
2
The R
function automatically
adjusts the picture to the most
suitable quality during playback.
When playback starts, the R
2
function activates.
Each press of the button changes the effect and indication in the display
window as follows:
REAL (status of playback started)
SOFT
Display window
STEREO
STEREO
STEREO
No indicator
you want.
Display window
STEREO
STEREO
STEREO
No indicator
Bilingual
Usually main
sound
Main (left channel)
Sub (right channel)
57
Additional Operations
NORMAL TRACKING
– – – – – – – – – – – – – – – – –
Tracking meter
2
R
DYNA (dynamic)
continued
59
Additional Operations
1-14
Searching using
the index
function
The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references to
find a specific recording. The VCR can
search up to 99 index signals ahead of or
behind the current position.
Using the INDEX SEARCH
buttons on the remote
commander
1
Insert an indexed tape into the VCR.
2
Press ./> INDEX SEARCH repeatedly to specify how many
index signals ahead or behind you want to search:
• To search ahead, press > INDEX SEARCH.
• To search backwards, press . INDEX
SEARCH.
The VCR starts searching and the index
number on the TV screen counts down to
zero. Playback starts from the point about
five seconds ahead of the specified index
mark.
58
Additional Operations
Adjusting the picture (continued)
About the Adaptive Picture Control (APC) function
The Adaptive Picture Control (APC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of
the video heads and tape. To maintain better
picture quality, we recommend that you set APC to
ON in the SET UP MENU (The APC indicator
lights up in the display window).
APC playback
The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.
APC recording
Whenever you insert a tape and first start recording, the VCR adjusts to the
tape using the APC function (the APC indicator flashes rapidly). This
adjustment is retained until the tape is ejected.
To deactivate the APC function
Press MENU and select SET UP MENU, then set APC to OFF. The APC
indicator in the display window turns off.
Tip
• To set the tracking to the centre position, press the PROGRAM +/– buttons on the
VCR at the same time.
Note
• There is a delay of a few seconds before the VCR actually starts recording while the
VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the
APC indicator flashes slowly) and press z REC to have the VCR analyse the tape
(the APC indicator flashes rapidly). After the APC indicator stops flashing, press
X PAUSE to start recording immediately. If you press X PAUSE before the APC
indicator stops flashing, the APC function is cancelled.
60
Additional Operations
./>
INDEX
SEARCH
INDEX
8
SEARCH
SET UP MENU
1/2
AUDIO MIX
ON
•
OFF
HIFI AUDIO
STD
•
NICAM
OFF
APC
•
ON
PAL / MESECAM
•
AUTO
PAL
MESECAM
NTSC PB
•
ON PAL TV
4 . 43
3 . 58
SELECT
: [
]
: [
SET
]
Advertisement
Table of Contents
