Honeywell TRADELINE T841A Homeowner's Manual page 2

Temperature Selection
To select the temperature setpoint, slide the lever to the desired point on the setpoint
scale. A click is heard and an indent felt every two degrees as the setpoint lever moves.
The enlarged, raised 5, 6, 7 and 8 on the right edge of the thermostat provide recognition
by touch and sight for the 50°F (10°C), 60°F (16°C), 70°F (21°C) and 80°F (27°C)
setpoints.
System Switch and Fan Switch Settings
To select System switch and Fan settings, slide the levers at the bottom of the thermostat
base to the desired setting. Enlarged, raised letters on the wallplate and the audible aid
click heard at each indent in setting System switch and Fan switch settings.
T841A: The large EH, H, O and C are the EM. HT., HEAT, OFF and COOL System switch
settings. The large A, O raised letters are the AUTO and ON Fan settings.
T841B: The large H, O and C are the HEAT, OFF and COOL System switch settings. The
large A, O raised letters are the AUTO and ON Fan settings.
NOTE: If the information on this card is desired in Braille, call 1-800-468-1502 for a copy.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
69-1044-2 G.H. Rev. 3-03
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Scarborough, Ontario
M1V 4Z9
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
www.honeywell.com/yourhome