Keypad Reset - Honeywell 6280 Series User Manual

Keypad Reset

To access Keypad Reset, press the Setup and System Setup icon and then do the following:
ICON
1. Press the Advanced Setup icon.
2. Enter your Authorized Code.
3. Press the Keypad Reset icon.
Night Setup
To set the NIGHT function, press the System Setup and Advanced Setup icon and then do the following:
ICON
1. Enter your Authorized Code, if required.
2. Press the Night Setup icon.
3. Select the arming mode to be activated when
NIGHT is selected on the "Arming" screen.
Output Setup Function
The Output Setup screen displays output selections. A maximum of 18 outputs can be enabled or disabled on the Output screen.
To set the Output Setup function, press the System Setup and Advanced Setup icon and then do the following:
ICON
1. Enter your Authorized Code, if required.
2. Press the Output Setup icon.
3. Select the outputs to display or not display on
the Output screen and press Apply.
Output Setup Icons
Output Disable
Output Enable
User Setup (cont'd)
ACTION
ACTION
ACTION
Apply Back
NOTES
When the Keypad Reset icon is pressed, the message is displayed:
Processor Reset
Are you sure you want to reset?
Select Yes or No.
NOTES
The NIGHT function can be set to arm the system in one of five arming
modes: Away - Stay - Instant - Night –Maximum.
Apply accepts the setting. Back cancels your selection.
NOTES
This is a local setting for the graphic keypad. If user has the maximum
number of keypads on the system, and wants to disable the same output
for all, each keypad needs to be set individually.
Apply accepts the setting. Back cancels your selection.
29