Location Of User's Control - Sharp 32UC4 Service Manual

32UC4

LOCATION OF USER'S CONTROL

Front Panel
POWER
Press On.
Press again Off.
OL
REMOTE CONTR
SENSOR
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
+
( ) Increases sound.
( ) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
DVD/VCR CONTROL
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
VOLUME UP/DOWN
+
( ) Increases sound.
( ) Decreases sound.
POWER
TV DVD
VCR DISPLAY INPUT
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C D
CH
VOL VOL
— +
CH
MENU MUTE
CATV TV
DVD VCR
REW PLAY FF
CH/SKIP
PAUSE STOP REC
PIP
SWAP FREEZE MOVE SELECT
TV • CATV • VCR • DVD
4
VIDEO/AUDIO IN 2 TERMINALS
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
"
( ) Selects next lower channel.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external
video INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times Switches back to the
original TV mode.
ENTER
Used in some instances where a Cable
Converter Box requires an enter
command after selecting channels,
when using the REMOTE KEYPAD
button.
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
"
( ) Selects next lower channel.
Moves the mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at the same time.