Advertisement
27N-S100, 27N-S180
CN27S10/14/18
Front Panel
POWER
Press → On.
Press again → Off.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the four categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
VCR CONTROL
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
LOCATION OF USER'S CONTROL
SENSOR AREA FOR
REMOTE CONTROL
VIDEO/AUDIO
(VIDEO/AUDIO terminals are also
provided on the rear.)
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
( ) Selects next lower channel.
"
• Press both at same time to
access MAIN MENU Screen.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
+
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode.
Press again → Switch to external video
INPUT 2 mode.
Press three times → Switch back to the
original TV mode.
ENTER
Used in some instances where a VCR
or Cable Converter Box requires an
"enter" command after selecting
channels, when using the REMOTE
KEYPAD button.
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
( ) Selects next lower channel.
"
• Moves the "
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
6
IN 2
TERMINALS
" mark of the MENU
Advertisement
