Philips 13PT30L1 Service Manual page 11

Sound Performance:
At 360 mv RMS/1 kHz to Audio input;
Output 1 Watt per channel or 3 Watts per channel with <10% Total Harmonic Distortion (THD).
At 1 Watt RMS, both channels driven, response is within ± 2dB from 20Hz to 20kHz.
Power Supply Voltages:
NAME VALUE
V+3.3 3.3 volts
V+5vD 5 volts
V+5v 5 volts
Vstby 5 volts
V+7.5v 7.5 volts
V+8.5v 8.7 volts
VmainAux 9 volts
Vsound 10.5 volts
Vsound 16.5 volts
V+13v 13.5 volts
V+13v 13.8 volts
V-13v -13.5 volts +/- 1 volt
V-13v -13.8 volts +/- 1 volt
MainSupply 95 volts
V+190v 190 volts
190V 190 volts
Mains (AC Power):
60 Hz, 120 volts AC nominal:
Allowed 90 to 132 volts AC
For Auto-Multi-Voltage Only:
60 Hz, 90 to 276 volts AC
Power consumption, worst control setting:
13" models – 48 Watts
19" models – 63 Watts
20" models – 70 Watts
Standby power consumption:
3 Watts +/-10%
High Voltage (EHT):
(At minimum brightness)
Screen Size:
Voltage: 24.1kV +/- 1kV
Color Temperature:
NORMAL
9200 +/- 10% 8200 +/- 15%
Note: Nominal specifications represent the design specifications. All units should be able to approximate
these. Some will exceed and some may drop slightly below these specifications. Limit specifications
represent the absolute worst condition that still might be considered acceptable. In no case should a unit fail
to meet limit specifications.
TOLERANCE AT COMPONENT
+/- 0.3 volt 2604
+/- 0.8 volt Emitter of 7612
+/- 0.5 volt Pin 6 of 1000
+/- 0.5 volt 3615
+/- 0.5 volt 2414
+/- 0.8 volt 2415
+/- 1 volt 2561
+/- 1 volt 2955 (2X1 W stereo, 1 W mono)
+/- 1 volt 2955 (2X3 W stereo)
+/- 1 volt 2410 (13" and 19" models)
+/- 1 volt 2410 (20" models)
2410 (13" and 19" models)
2410 (20" models)
+/- 1.5 volts Pin 2 of 5445
+/- 10 volts 2413
+/- 10 volts Pin 3 of connector 0244
13" 19"
25.4kV +/- 1kV
WARM COOL
10,200 +/- 15%
20"
27.2kV +/- 1.5kV (for reference only)