JVC UX-M3R Service Manual page 8

UX-M3R
Removing the CD mechanism
assembly
Remove the left and right side panels.
Remove the top cover.
Remove the front panel assembly.
1. Disconnect the wires from the four connectors
CN601, CN602, CN603 and CN701 on the CD &
MCU board.
2. From the left side of the main body, remove the tie
band bundling the wires.
3. Loosen the screw J retaining the main board.
4. From the left and right sides of the main body,
remove the four screws K retaining the bracket.
5. Slide the CD mechanism assembly toward the front
and remove it from the studs of the main board.
1-8
(See Figs. 12 to 14.)
CN701
CN603
CD & MCU board
CD mechanism assembly
Fig.12
CD & MCU board
K
J
Fig.13
CD & MCU board
Stud
Fig.14
CN601
CN602
Tie band
K
Main board