Fiat 2014 500 Owner's Manual page 178

176 UNDERSTANDING YOUR INSTRUMENT PANEL
4. Press the UP or DOWN
5. Briefly press the MENU button to return to the
sub-menu.
When you have made the required settings, briefly press
the MENU button to go back to the sub-menu screen, or
press and hold the MENU button (approximately one
second) to go back to the main screen without storing the
settings.
Hill Start Assist
This function is used when starting a vehicle from a stop
on a hill. Hill Start Assist maintains the same level of
brake pressure the driver applied for a short period of
time after the foot has been removed from the brake
pedal.
button for setting. Proceed as follows to switch this function on or off:
1. Briefly press the MENU button. Press the UP
2. Press the UP
3. Briefly press the MENU button to go back to the menu
DOWN button to highlight the Hill Start Assist.
Press the MENU button to enter the Hill Start Assist
MENU.
or DOWN
screen, or press and hold the button (approximately
one second) to go back to the main screen without
storing the settings.
or
button for setting.