CARE AND MAINTENANCE
BELT TENSION
ENGINE TO MOWER DECK BELT
42" and 50"
60"
The engine to mower deck drive belts are automatically held in proper
tension by springs which push the deck assembly forward and do not
require any additional adjustment to be made.
MOWER DECK SERPENTINE BELT
REAR
HANGER
PIN
42"
50"
60"
Refer to illustration for adjustment procedure.
NOTE:
Page 28
:
P/N 6111
P/N 6938
P/N 6109
P/N 1300
P/N 6939
Belt deflection or movement should be approximately 1/4" when
measured at mid-point between pulleys.
Periodically inspect both belt and idler systems.
:
TIGHTEN OR LOOSEN
HEX NUT TO ACHIEVE
THIS DIMENSION
50" & 60"
42"
5/8"
3/4"