1. Switch off the TV.
2. Follow the directions printed on the CAM
and insert the CAM into the Common
Interface at the side of the TV.
3. Push the CAM in as far as it will go and
wait for the CAM to be activated. This may
take several minutes. Do not remove the
CAM from the slot when in use as digital
services will be deactivated.
Access CAM services
NonPu blish
1. After inserting and activating the CAM,
press
.
2. Select [Common interface], then press
OK.
3. Select the CAM provider and press OK.
Watching a CAM service
If a CAM is inserted and subscription fees
are paid, the TV shows the programme from
the digital TV service provider. The
applications, functions, the content and the
onscreen messages vary per CAM service.
EN
47