Philips 39” LCD TV Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. LCD TV
  5. LCD TV
  6. Service manual

Philips 39” LCD TV Service Manual

39” lcd tv chassis pl13.11
Hide thumbs Also See for 39” LCD TV:
Table of Contents

Advertisement

Quick Links

Service Manual

TYPE A
39PFL2608/F7
39PFL2908/F7
39PFL4408/F8
TYPE B
39PFL2708/F7
TYPE C
39PFL2708/F7
39PFL4208/F8
This service manual contains information of different types of models.
Make sure to refer to the section describing your model.
This service manual contains information of different types of models.
Make sure to refer to the section describing your model.
© 2013 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
PHILIPS
(Serial No.: DS1, DS2)
PHILIPS
(Serial No.: DS1)
PHILIPS
(Serial No.: XA1)
PHILIPS
(Serial No.: DS2)
PHILIPS
(Serial No.: DS1)
PHILIPS
(Serial No.: XA1)
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
chassis PL13.11

Contents

T
39" LCD TV
130817

Advertisement

Table of Contents
loading

Related Manuals for Philips 39” LCD TV

Summary of Contents for Philips 39” LCD TV

  • Page 1: Service Manual

    39” LCD TV chassis PL13.11 Service Manual Contents TYPE A 39PFL2608/F7 PHILIPS (Serial No.: DS1, DS2) 39PFL2908/F7 PHILIPS (Serial No.: DS1) 39PFL4408/F8 PHILIPS (Serial No.: XA1) TYPE B 39PFL2708/F7 PHILIPS (Serial No.: DS2) TYPE C 39PFL2708/F7 PHILIPS (Serial No.: DS1)

  • Page 2: Important Safety Notice

    IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all P&F Equipment. The service procedures recommended by P&F and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Specifications ................1-1 Important Safety Precautions .

  • Page 4: Specifications

    SPECIFICATIONS < TUNER / NTSC > Description Condition Unit Nominal Limit 1. AFT Pull-In Range TV.ch.4 ±2.3 ±2.1 TV.ch.4 dBμV 2. Synchronizing Sens. CA.ch.31 dBμV CA.ch.87 dBμV < TUNER / ATSC > Description Condition Unit Nominal Limit 1. Received Freq. Range (-28dBm) ±100 ch.4 -76/0...

  • Page 5: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
  • Page 6 3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
  • Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
  • Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.

  • Page 9: Standard Notes For Servicing

    STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: Top View Bottom View 1.
  • Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
  • Page 11 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.

  • Page 12: Instructions For Handling Semi- Conductors

    Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

  • Page 13: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS Screw Torque Specification Step/ Fig. Loc. Part Removal Note Ref. Part Tightening Part Name Number Torque SCREW P-TIGHT Stand Base D1 --------------- L9 GBHP3120 (3X12 BIND HEAD + 5.2±0.9lb·in Assembly BLK) Rear Cover D1 2(S-3), 10(S-4) SCREW S-TIGHT L23 GBJS3060 6.1±0.9lb·in (M3X6 BIND HEAD+)
  • Page 14 Important precautions concerning the • When disassembling, first detach the hooks on each end on the bottom side, then detach the remaining LCD Panel Assembly: hooks moving toward the center. 1. When you disassemble/re-assemble the X-PCB • Make sure the hooks are securely in place when Cover assembling.
  • Page 15 Type A [5] Digital Main CBA Unit (S-6) Jack Holder Type B, C (S-5) (S-6) Jack Holder [4] Power Supply CBA Fig. D2 [8] LCD Panel Assembly [7] Speaker (S-7) [7] Speaker [6] Stand Bracket Fig. D3 PL13.11_DC...
  • Page 16 [9] X-PCB Cover Hook [10] Front Cabinet Hook (S-8) Hook Hook Hook Hook Shield Plate Sensor Lens Hook Control Plate [11] Function CBA Unit (S-9) Fig. D4 : Make sure to read all the precautions on page 4-2 when you disassemble/re-assemble the X-PCB Cover.
  • Page 17 TV Cable Wiring Diagram To LCD Panel To LCD Panel Assembly Assembly Digital Main Power Supply CBA CBA Unit CN1001 CN3906 *2,*3 CN3013 CN3601 CN501 CN3701 CN3602 CN601 CN3105 CN3801 *2,*3 CN3101 To AC Cord Function CBA Unit To Speaker CN4052 *1: TYPE A *2: TYPE B...

  • Page 18: Electrical Adjustment Instructions [Type A]

    ELECTRICAL ADJUSTMENT INSTRUCTIONS [TYPE A] 1. Purity Check Mode This mode cycles through full-screen displays of red, General Note: “CBA” is abbreviation for green, blue, and white to check for non-active pixels. “Circuit Board Assembly.” 1. Enter the service mode. Note: Electrical adjustments are required after 2.

  • Page 19: White Balance Adjustment

    2. VCOM Adjustment The White Balance Adjustment should be performed when replacing the LCD Panel Test Point Adj. Point or Digital Main CBA. [CHANNEL UP/DOWN] Screen 3. White Balance Adjustment buttons M. EQ. Spec. Purpose: To mix red and blue beams correctly for Color analyzer See below pure white.
  • Page 20 5. Press [3] button to select the “HDB” for High Drive 13. Press [9] button to select the “LDB” for Low Drive Blue adjustment. (“HDB” appears in the screen.) Blue adjustment (“LDB” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to 6.
  • Page 21 [TYPE B, C] How to set up the service mode: General Note: “CBA” is abbreviation for Service mode: “Circuit Board Assembly.” 1. Turn the power on. Note: Electrical adjustments are required after 2. Press [MENU] button to display Setup menu. replacing circuit components and certain 3.
  • Page 22 1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN] Screen 1. Enter the service mode. buttons 2. Each time the [7] button on the remote control unit M.
  • Page 23 The White Balance Adjustment should be 6. Press [MENU] button. The internal Raster signal appears in the screen. (“Internal (Single)” appears performed when replacing the LCD Panel in the upper right of the screen as shown below.) or Digital Main CBA. 3.

  • Page 24: How To Initialize The Lcd Tv

    HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.

  • Page 25: Firmware Renewal Mode

    FIRMWARE RENEWAL MODE [TYPE A] Update file selection screen appears as follows. (Files included in the USB storage device are displayed. Equipment Required " * " differs depending on the models. 1. USB storage device *****_******.upg Select an upgrade file 2.
  • Page 26 [TYPE B, C] Equipment Required a. USB storage device b. Remote Control Unit Firmware Update Procedure User Upgrade (Filename example: TVNB012_00_PF_XX91_BC.ecc or TVNB1012_00_PG_XX91_BA0.bin) Upgrade the firmware only. The setting values will not be initialized. The User Upgrade and the Firmware Upgrade (Factory Upgrade) will be done by the same file. If you want to upgrade the firmware and initialize the setting values also, add “FACT_”...
  • Page 27 Factory Upgrade (Firmware Upgrade/Flash Upgrade) Firmware Upgrade (Filename example: FACT_TVNB012_00_PF_XX91_BC.ecc or FACT_TVNB1012_00_PG_XX91_BA0.bin) Upgrade the firmware and initialize the setting values. The User Upgrade and the Firmware Upgrade (Factory Upgrade) will be done by the same file. If you want to upgrade the firmware and initialize the setting values also, add “FACT_”...

  • Page 28: Troubleshooting

    TROUBLESHOOTING [Power Supply Section] FLOW CHART NO.1 The power cannot be turned on. Is the fuse (F602) normal? See FLOW CHART No.2 <The fuse blows out.> Check if there is any leak or short-circuit on the primary circuit component and repair it if defective. (C607, C612, D601, D602, D603, D604, D605, D606, D607A, D608, D609A, D621, D623, Q601, Q602, Is the P-ON+21V line voltage normal?
  • Page 29 FLOW CHART NO.5 P-ON+21V is not output. Check D650, D651, D652, D659, C651, C652, C653, C667, C668 and their periphery circuit. Repair it if defective. FLOW CHART NO.6 AMP+13V is not output. FLOW CHART NO.7 [TYPE A] AL+3.3V is not output. [TYPE B] AL+3.3V is not output.
  • Page 30 [Video Signal Section] FLOW CHART NO.1 The key operation is not functioning. Replace the Function CBA Unit. Replace the Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit. (Operation is possible from the unit.) Check AL+3.3V line and repair it if defective.
  • Page 31 [Audio Signal Section] FLOW CHART NO.1 Audio is not output normally. See FLOW CHART NO.6 <AMP+13V is not output. [Power Supply Section]> See FLOW CHART NO.7 <AL+3.3V is not output. [Power Supply Section]> Replace the Digital Main CBA Unit. PL13.11ATR...

  • Page 32: Block Diagrams [Type A]

    BLOCK DIAGRAMS [TYPE A] 1. System Control Block Diagram PL13.11ABLS...
  • Page 33 2. Video/Audio Block Diagram PL13.11ABLVA...
  • Page 34 3. Digital Signal Process Block Diagram PL13.11ABLD...
  • Page 35 4. LED Backlight Drive Block Diagram PL13.11BLBD...
  • Page 36 5. Power Supply Block Diagram PL13.11ABLP...

  • Page 37: Type B]

    [TYPE B] 1. System Control Block Diagram PL13.11BBLS...
  • Page 38 2. Video/Audio Block Diagram PL13.11BBLVA...
  • Page 39 3. Digital Signal Process Block Diagram PL13.11BBLD...
  • Page 40 4. LED Backlight Drive Block Diagram PL13.11BLBD...
  • Page 41 5. Power Supply Block Diagram 9-10 PL13.11BBLP...

  • Page 42: Type C]

    [TYPE C] 1. System Control Block Diagram PL13.11CBLS 9-11...
  • Page 43 2. Video/Audio Block Diagram PL13.11CBLVA 9-12...
  • Page 44 3. Digital Signal Process Block Diagram PL13.11CBLD 9-13...
  • Page 45 4. LED Backlight Drive Block Diagram PL13.11BLBD 9-14...
  • Page 46 5. Power Supply Block Diagram 9-15 PL13.11CBLP...

  • Page 47: Schematic Diagrams / Cba And Test Points

    SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
  • Page 48 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.

  • Page 49: Power Supply Diagram

    Power Supply 1 Schematic Diagram CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. NOTE: CAUTION ! : For continued protection against risk of fire, If Main Fuse (F602) is blown , check to see that all components in the power supply The voltage for parts in hot circuit is measured using replace only with same type 2.5A, 250V fuse.
  • Page 50 Power Supply 2 Schematic Diagram C1026 220P/500V CONTINUE D1001 L1001 POWER 1 SK210TD 22uH P-ON+21V R1006 BACKLIGHT-ADJ C1008 C1010 C1018 C1014 C1012 R1034 R1005 47/100V 47/100V 1/100V 1/100V OPEN 510K PROTECT3 C1001 C1002 C1003 C1004 C1005 C1006 BACKLIGHT-SW R1035 330/25V 330/25V OPEN 430K...
  • Page 51 Function Schematic Diagram FUNCTION CBA UNIT C4054 TO DIGITAL MAIN R4052 R4060 CBA UNIT CN3101 6.8K OPEN CN4052 or CN3105 R4053 1 AL+3.3V 4.7K 2 P-ON+5V 3 LIGHT 4 LED1 D4051 R4055 R4059 SMLE12WBC7W1HR OPEN OPEN 5 REMOTE IC4051 POWER PH5502B2NA1-E4 6 KEY-IN1 (LIGHT SENSOR)
  • Page 52 Digital Main 1 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. CONTINUE (NO CONNECTION) CN3905...
  • Page 53 Digital Main 2 Schematic Diagram [TYPE A] CONTINUE DIGITAL 7 P-ON+21V R3942 P-ON+3.3V CONTINUE R3952 D3905 DIGITAL 2 Q3905 OPEN OPEN OPEN LCD+12V/+21V C3996 OPEN D3906 OPEN IC3901 R3899 R3550 OPEN OPEN OPEN C3946 OPEN R3897 C3949 OPEN OPEN R3891 TO LCD PANEL OPEN C3951...
  • Page 54 Digital Main 3 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. IC3101(2/7) MN2WS0270EA DIGITAL MAIN CBA UNIT...
  • Page 55 Digital Main 4 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. IC3101(3/7) MN2WS0270EA DIGITAL SIGNAL PROCESS...
  • Page 56 Digital Main 5 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 7 TU3001...
  • Page 57 Digital Main 6 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT IC3101(5/7) MN2WS0270EA...
  • Page 58 Digital Main 7 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 1 P-ON+21V...
  • Page 59 Digital Main 8 Schematic Diagram [TYPE A] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT R3144 CONTINUE...
  • Page 60 Digital Main 1 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 4 P-ON+21V...
  • Page 61 Digital Main 2 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT TU3901 (TUNER UNIT) IC3013...
  • Page 62 Digital Main 3 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. C3009 R3082 IC3005(3/6)
  • Page 63 Digital Main 4 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 3 IC3005(4/6)
  • Page 64 Digital Main 5 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 4 P-ON+3.3V...
  • Page 65 Digital Main 6 Schematic Diagram [TYPE B] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 4 HDMI-...
  • Page 66 Digital Main 1 Schematic Diagram [TYPE C] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into five and shown as IC3001 (1/5) ~ IC3001 (5/5) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT CONTINUE DIGITAL 5...
  • Page 67 Digital Main 2 Schematic Diagram [TYPE C] CONTINUE DIGITAL MAIN CBA UNIT DIGITAL 1 PANEL-VCOM-PWM CELL-PWR-CTRL R3039 LCD+12V OPEN R3035 OPEN CN3001 (NO CONNECTION) 31 LCD+12V C3514 C3513 30 LCD+12V OPEN OPEN 29 LCD+12V R3028 28 GND OPEN R3037 OPEN 27 VCOM-PWM C3918 C3921...
  • Page 68 Digital Main 3 Schematic Diagram [TYPE C] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into five and shown as IC3001 (1/5) ~ IC3001 (5/5) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT IC3001(2/5) R3231...
  • Page 69 Digital Main 4 Schematic Diagram [TYPE C] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into five and shown as IC3001 (1/5) ~ IC3001 (5/5) in this Digital Main Schematic Diagram Section. IC3001(3/5) MSD8200DS-S1 DIGITAL MAIN CBA UNIT...
  • Page 70 Digital Main 5 Schematic Diagram [TYPE C] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into five and shown as IC3001 (1/5) ~ IC3001 (5/5) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT CONTINUE DIGITAL 3...
  • Page 71 Digital Main 6 Schematic Diagram [TYPE C] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into five and shown as IC3001 (1/5) ~ IC3001 (5/5) in this Digital Main Schematic Diagram Section. TU3901 (TUNER UNIT) DIGITAL MAIN CBA UNIT IC3001(5/5)
  • Page 72 Power Supply CBA Top View Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, CAUTION ! when troubleshooting this type of power supply circuit, Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
  • Page 73 Power Supply CBA Bottom View Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, CAUTION ! when troubleshooting this type of power supply circuit, Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.

  • Page 74: Wiring Diagram

    WIRING DIAGRAM [TYPE A] 11-1 PL13.11AWI...
  • Page 75 [TYPE B] 11-2 PL13.11BWI...
  • Page 76 [TYPE C] PL13.11CWI 11-3...

  • Page 77: Exploded Views

    EXPLODED VIEWS [TYPE A] LCD1 CL3011 [39PFL2608/F7, 39PFL2908/F7] Digital Main CBA Unit Power Supply CBA CL3701 Function CBA Unit AC601 CL3801 CL3101 SP3801 SP3802 See Electrical Parts List for parts with this mark. SSK1 SNA1 SBA1 [39PFL2608/F7] [39PFL2908/F7, 39PFL4408/F8] SSK2 12-1 PL13.11_A CEX...
  • Page 78 [TYPE B, C] LCD1 CL3011 [39PFL2708/F7] Digital Main CBA Unit Power Supply CBA CL3701 Function CBA Unit AC601 CL3801 CL3101 SP3801 SP3802 See Electrical Parts List for parts with this mark. SSK1 SNA1 SBA1 SSK2 12-2 PL13.11_B CEX...
  • Page 79 Packing [39PFL2608/F7, 39PFL2708/F7, 39PFL2908/F7] SSK1 SSK2 [39PFL2708/F7, 39PFL2908/F7, 39PFL4208/F8, 39PFL4408/F8] [39PFL2608/F7] Tape SNA1 Packing Tape [39PFL2608/F7] SBA1 [39PFL2708/F7, 39PFL2908/F7, 39PFL4208/F8, 39PFL4408/F8] Packing Tape [39PFL4208/F8, 39PFL4408/F8] F R O N F R O Some Ref. Numbers are not in sequence. Packing Tape 12-3 PL13.11_PEX...

  • Page 80: Lcd Panel Assembly

    1EM030610A SET BAG A31PBUH 2EMC00084 SERIAL NO. LABEL A01PBUH ---------- ACCESSORIES POLYETHYLENE BAG HDPE 180X340XT0.03 1EM435579 OWNERS MANUAL A3RT0UH 2EMN00086 REMOTE CONTROL UNIT YKF340-001 URMT39JHG003 BATTERY R03-B500/01S XB0M451CZB01 QUICK START GUIDE A3RT0UH 1EMN30387 REGISTRATION CARD(PHILIPS) A11P4UH 1EMN27321 2013/02/18 13-1 A3RTBCA.fm...

  • Page 81: Electrical Parts

    Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CAPACITORS Before replacing any of these components, read C602# SAFTY CAP . 2200pF/250V KX CA2E222MR101 carefully the product safety notice in this service C604# CAP METALLIZED FILM 0.22µF/310V /K/LE-MX CTA2240DC001 manual.
  • Page 82 Ref. No. Description Part No. Ref. No. Description Part No. RES CHIP 1608 1/10W F 100k Ω D604 DIODE 1N5406BH NDL1001N5406 R652 RTW1003HH008 RES CHIP 1608 1/10W 0 Ω D605 ZENER DIODE MM5Z6V2B ND1BMM5Z6V2B R653 RRXA000HH014 RES CHIP 3216 1/4W J 180 Ω D606 DIODE FAST RECOVERY RS1JJTD ND1Z0RS1JJTD...
  • Page 83 Ref. No. Description Part No. MISCELLANEOUS HEAT SINK PNL A31T0UH 1EM439707 BC601 WIRE CP STP-S-0.50 XZ40F0REN001 BC602 WIRE CP STP-S-0.50 XZ40F0REN001 BC603 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 BC604 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 F602# FUSE TIME RAG SLT250V2.5A PDGSLB0NG252 JS603 WIRE CP STP-S-0.50 XZ40F0REN001 JS604 WIRE CP STP-S-0.50...
  • Page 84 TYPE A PARTS LIST [39PFL2608/F7 (Serial No.: DS2)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 85 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTES: 1.
  • Page 86 TYPE A PARTS LIST [39PFL2908/F7 (Serial No.: DS1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 87 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTES: 1.
  • Page 88 TYPE A PARTS LIST [39PFL4408/F8 (Serial No.: XA1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 89 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTES: 1.
  • Page 90 TYPE B PARTS LIST [39PFL2708/F7 (Serial No.: DS2)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 91 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. Before replacing any of these components, read POWER SUPPLY CBA A31TBMPW-001 carefully the product safety notice in this service C662 CAP ELE 22µF/50V/M/85 CEF2200V8006...
  • Page 92 TYPE C PARTS LIST [39PFL2708/F7 (Serial No.: DS1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 93 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. R662 Not used Before replacing any of these components, read R670 Not used carefully the product safety notice in this service R671 Not used manual.
  • Page 94 TYPE C PARTS LIST [39PFL4208/F8 (Serial No.: XA1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
  • Page 95 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. R662 Not used Before replacing any of these components, read R670 Not used carefully the product safety notice in this service R671 Not used manual.

  • Page 96: Revision History

    REVISION HISTORY Chassis PL13.11 • 2013/02/28 39PFL2608/F7 (Serial No.: DS1) Added • 2013/03/27 39PFL2708/F7 (Serial No.: DS2) Added • 2013/04/19 39PFL2908/F7 (Serial No.: DS1) Added • 2013/04/30 39PFL4208/F8 (Serial No.: XA1) Added • 2013/06/05 39PFL4408/F8 (Serial No.: XA1) Added • 2013/06/28 39PFL2608/F7 (Serial No.: DS2) Added •...
  • Page 97 COMPARISON LIST OF MODEL NAMES Chassis PL13.11 39PFL2608/F7 (DS1) A3RTBUH TYPE A (DS2) A3RTCUH TYPE A 39PFL2708/F7 (DS1) A31T2UH TYPE C (DS2) A31TCUH TYPE B 39PFL2908/F7 (DS1) A3RT0UH TYPE A 39PFL4208/F8 (XA1) A31TAMA TYPE C 39PFL4408/F8 (XA1) A3RTAMA TYPE A PL13.11COM...

This manual is also suitable for:

39pfl2608/f739pfl2908/f739pfl4408/f839pfl2708/f739pfl4208/f8

Table of Contents