Canon PIXMA MP950 Service Manual page 19

(IV) Remove the front cover R, the side cover R, and the cable cover.
- Front cover R: Be cautious with a scratch or breaking claws.
For the location of the claws, see the red circles in the photos below.
- After removing the front cover R, detach the main case plate R.
- After detaching the main case plate R (the photo in the left) by removing one screw, remove the cable cover
(the photo in the right) by sliding the side cover R outward.
- Remove the side cover R. (Be cautious not to contact with the LED Windows (indicated in green)
card board area.
- For the location of the claws on the side cover R, the main case, and the bottom case, see the photos below
(Indicated by the red circles).
1-14