Enx-20 Board, Riser Board - Sony Vaio PCV-W500GN1 Service Manual

DISASSEMBLY
9
1
A A
3
TOP TOP FOR SAFETY FOR SAFETY
ENX-20 board
Bracket (KI)
5
ENX-20 board,
DC fan, and others
2
4
Attach the copper
leaf tape (4) as shown
in the right picture.
1
DISASSEMBLY FLAMEHARNESS
FLAMEHARNESS
9
5
Coaching clip
9 8
7
6
B A
Copper
leaf tape
Copper leaf tape
– 13 –
EXPLODED VIEW
EXPLODED VIEW

ENX-20 BOARD, RISER BOARD

1 Remove the two connectors.
2 Remove the
Riser
board three screws.
3 Remove the ENX-20 board,
DC fan, and others in the
direction of the arrow A.
Then disconnect the
B-to-B connector.
5
Peel off the copper leaf tape.
4
5 Remove the four
screws and the
coating clip.
6 Remove the ENX-20 board
and the Riser board in the
direction of the arrow B.
7 Remove the two
screws and
Bracket (KI).
Disconnect the B-to-B
8
connector, and remove the
Riser board from the
ENX-20 board.
Disconnect the connector.
9
PARTS LIST PARTS LIST
+B (3 X 6)
7-682-547-09
Black
+PSW (3 X 6)
7-682-947-01
Gold
+PSW (3 X 6)
7-682-947-01
Gold